10 Best Microphone Boom Arms Under $100 (October 2026) Top Reviews

After 30 days of clamping, unclamping, and rotating 10 different microphone boom arms under $100 across my home studio and our team’s two test desks, I have a confident answer. The best microphone boom arms under $100 in 2026 are the ones that survive spring sag, route your cable cleanly, and never loosen during a four-hour recording session. I tested each arm with a Blue Yeti, a HyperX QuadCast, and a 1.6 lb Shure SM7B to see which ones actually hold up.

Our team compared weight capacity, desk clamp thickness range, reach, cable management, and real-world positional stability. Cheap scissor arms sag within weeks; the picks below won’t. Whether you’re a Twitch streamer, a podcaster recording long interviews, or a remote worker who just wants a clean desk setup, this guide covers the best mic boom arm under $100 for your specific use case – including streaming, podcasting, gaming, and heavy broadcast microphones like the SM7B.

Our Top 3 Tested Mic Boom Arms Under $100

Comparing the Best Mic Boom Arms Under $100 in 2026

1. InnoGear Boom Arm Microphone Mic Stand – Editor’s Choice for Best Overall

The InnoGear Boom Arm is the mic boom arm under $100 I keep coming back to. I clamped it to a 1.5 inch oak desk with a Blue Yeti and forgot about it for three weeks. It held its position through four-hour recording sessions without a single droop, and the 360° base rotation meant I could swing the Yeti out of frame for video calls and pull it back for podcast recordings without retightening anything.

What sells this arm is the spring tension. After 30 days of daily use, the springs feel identical to day one. Reviewers on r/podcasting consistently report the same thing – InnoGear’s spring design resists the slow sag that kills most cheap scissor arms within six months. The included 5/8 to 3/8 adapter covers Blue Yeti, HyperX QuadCast, and Shure SM7B out of the box, which is the trio most buyers in this category actually own.

For first-time buyers asking whether a budget boom arm is worth it, the InnoGear MU01 is the answer. It feels more expensive than it is, the clamp padded my desk without scratching, and the cable management channel routes the XLR cleanly. If you only buy one mic boom arm under $100, this is the one.

Load Capacity and Spring Tension

The 3.3 lb / 1.5 kg load rating handles the Blue Yeti (1.2 lb), HyperX QuadCast (1.3 lb), and the Shure SM7B (1.68 lb) – just – with a shock mount attached. If you plan to add a shock mount plus a pop filter, factor in the extra 0.3 to 0.5 lb of accessory weight before you load up this arm. I tested the InnoGear with a Blue Yeti plus a Rode PSM1 shock mount and a cheap pop filter; the arm held steady at all angles, including fully horizontal.

Reach, Rotation, and Clamp Compatibility

The horizontal reach maxes out around 27.6 inches, which is enough to clear a 27 inch monitor and still sit the mic close to your mouth. The base rotates a full 360°, and the upper joint adds another 135° of tilt. The C-clamp fits desks up to 2 inches thick, which covers most standard home office desks but won’t work on glass desks thicker than 1.5 inches. For renters with a desk they can’t drill into, this clamp style is exactly what you want.

Best For

First-time boom arm buyers, podcasters on a tight budget, streamers who want a “set and forget” arm, and anyone running a Blue Yeti, HyperX QuadCast, or entry-level XLR mic up to about 1.4 lb.

Skip If

You run a Shure SM7B with a Cloudlifter and a shock mount (over 2 lb total) – you’ll want the InnoGear MU-PSA28 below instead, which has a 3.5 lb rating.

2. FIFINE BM88 Low Profile Microphone Boom Arm – Best Low-Profile Arm for Streamers

The FIFINE BM88 is the mic boom arm under $100 that disappears on camera. I mounted it to my streaming desk, and the arm sits flat against the back edge of my desk with the microphone hovering just above my keyboard. Nothing blocks my webcam, nothing catches my eye, and the all-metal construction means it doesn’t wiggle when I slam keys during ranked games.

Low-profile arms solve a real problem for streamers. Traditional scissor arms stick up above the desk and ruin a clean webcam shot. The BM88 mounts flat and extends forward, so the only thing your audience sees is the mic itself. This is the same design philosophy as the Elgato Wave Mic Arm LP, but at roughly half the price, with all-metal construction instead of the Elgato’s plastic-accented build.

The hidden cable management is genuinely hidden, not just “cable ties included.” The cable runs through channels inside the arm and exits near the base. For on-camera setups, this is the cleanest look under $100 in our tests. Reviewers on r/Twitch consistently call the BM88 the best budget arm for streamers who care about framing.

Range of Motion and Mic Compatibility

The arm moves 220° vertically and 360° horizontally, with a 29 inch reach. That’s enough to position a mic right in front of your mouth from a typical 24 inch deep desk. The included 1/4, 3/8, and 5/8 adapters mean the BM88 works with the Blue Yeti, HyperX QuadCast, Elgato Wave, Shure MV7, and FIFINE AM8 without buying extra parts.

Desk Clamp and Build Quality

The C-clamp fits desks between 0.8 inch and 2.4 inches thick. I tested it on a 2 inch thick bamboo standing desk conversion, and the clamp held without slipping. The all-metal frame does mean this arm weighs more than the InnoGear MU01 above. If you have a flimsy desk or a glass desktop, consider whether the clamp will hold the weight before buying.

Best For

Twitch streamers, YouTubers who film mic-on, podcasters who want a clean desk shot, and anyone who finds a traditional scissor arm distracting on camera.

Skip If

You need the arm to sit behind a 32 inch or wider monitor – the 29 inch reach falls short for extra-wide desks without an extension piece.

3. InnoGear MU-PSA28 Mic Arm with Cable Management – Best Cable Management for Heavy Mics

The InnoGear MU-PSA28 is what I reach for when a Shure SM7B enters the picture. The 3.5 lb load rating handles the SM7B plus a shock mount without the arm drifting down during long sessions. After 30 days of testing with the SM7B and a Cloudlifter, the springs still hold their tension, and the cable management channels keep the thick XLR cable out of my shot.

Cable management is the most underrated spec on a boom arm. Most budget arms ship with cable ties, which is fine for a thin USB cable but fails completely for a stiff XLR cable with a heavy connector. The MU-PSA28 has actual cable channels with removable rubber covers – you drop the cable in, snap the cover shut, and the cable is hidden from end to end. For podcasters and streamers with on-camera setups, this is the difference between a pro-looking rig and a spaghetti mess.

The 32.3 inch horizontal reach is the longest in our roundup, which makes this arm ideal for L-shaped desks or setups where the clamp sits behind a deep monitor arm. The included 6.3 inch extension riser adds vertical clearance so you can position the mic above a 24 inch monitor without the arm riding at an awkward angle.

Spring Tension Under Heavy Loads

Spring tension is where cheap arms fail. I tested the MU-PSA28 with a 1.68 lb Shure SM7B plus a 0.4 lb shock mount – total 2.08 lb – and the arm held the mic steady at all angles. The dual internal springs are tensioned for the 3.5 lb ceiling, so there’s headroom to spare. This is the arm I’d trust for the heaviest mic in your studio.

Reach and Clamp Specs

The C-clamp fits desks up to 2 inches thick. I would not recommend this arm for glass desktops because the clamp pressure on a thin glass panel risks cracking. For solid wood, MDF, or bamboo desks, the clamp is solid. The base rotates 360° for repositioning between recording and video call setups.

Best For

Heavy broadcast mics (Shure SM7B, Rode PodMic, Audio-Technica AT2040), podcasters who want a clean camera-visible rig, and anyone tired of zip ties.

Skip If

You’re running a Blue Yeti or HyperX QuadCast under 1.5 lb – the lighter InnoGear MU01 above is a better match and saves money.

4. Amazon Basics Sturdy Portable Boom Stand – Best Budget Boom Stand With Tall Reach

The Amazon Basics Portable Boom Stand is the only true floor-standing option in our roundup, and it’s the one I recommend for vocalists, presenters, and anyone who switches between sitting and standing while recording. The tripod base folds flat, the boom arm telescopes to 85.75 inches, and the whole rig fits in a closet when you’re done.

Boom arms clamp to your desk. This boom stand stands on the floor. If your desk is shared with a partner, if you record in different rooms, or if you simply don’t want a clamp on your workspace, this is the format you want. The Amazon Basics stand handles the Blue Yeti, Fifine K669B, and any other USB mic up to 2 lb.

Setup is five minutes: unfold the tripod, extend the center pole, attach the boom arm, drop in your mic. The included cable clip is small but functional. For podcasters recording two-person interviews where one guest sits and one stands, this stand adapts to both positions without a second clamp.

Stability Under Load

The tripod is rated for 2 lb maximum. With a 1.2 lb Blue Yeti, the legs stay planted on hard floors. On carpet, the tripod can shift, especially when the boom is fully extended. If you record on carpet, weigh down the tripod base with a small sandbag or gym plate. Reviewers on r/recordingmusic noted the same trade-off: tripod stands are portable but need anchoring on soft floors.

Reach and Adjustability

The boom arm telescopes from a low seated position up to 85.75 inches. The molded plastic counterweight at the back of the boom balances lighter mics. For heavier mics approaching the 2 lb limit, the counterweight struggles, and the boom tends to dip. Stay below 1.5 lb for the smoothest experience.

Best For

Vocalists, mobile podcasters, presenters who switch between sitting and standing, and anyone who doesn’t want a clamp on their desk.

Skip If

You want a permanent desk-mounted setup or you run a heavy broadcast mic – get a clamp-mounted arm like the InnoGear MU01 instead.

5. InnoGear Mic Stand with Shock Mount and Pop Filter – Best All-In-One Kit

The InnoGear MU059 is the kit I recommend to anyone starting from zero. You get the boom arm, a shock mount, a double-screen pop filter, a 3/8 to 5/8 adapter, and five cable ties in one box. For a first-time streamer on a tight budget, this is the cheapest path to a clean, isolated, plosive-free recording setup.

I tested the kit with a HyperX QuadCast and a Fifine K669B. The pop filter sits on a flexible gooseneck and the shock mount cradles the mic without touching it. Plosives dropped to nearly nothing on hard consonants, and keyboard taps were no longer audible in the recording. The arm itself uses the same heavy-duty spring design as the InnoGear MU01 above, so positional stability is solid.

Where the kit falls short is the included shock mount, which is sized for smaller mics like the Fifine K669B and the HyperX SoloCast. If you own a Blue Yeti, the shock mount won’t fit – you’ll need to swap in your own. For entry-level USB mics under 1 lb, though, this kit punches above its tier.

Build Quality and Clamp

The zinc alloy clamp is sturdier than the plastic clamps on cheaper kits. The sponge padding prevents desk scratches, and the clamp fits desktops up to 2 inches thick. After three weeks of testing, the clamp showed no signs of loosening. The arm itself is steel with a powder-coated finish that resists fingerprints.

Included Accessories Worth Calling Out

The double-screen pop filter is a meaningful upgrade over the single-layer foam windscreens that ship with most entry-level mics. It reduces plosives on hard “P” and “B” sounds without muffling the high end. The cable ties are basic but functional. The shock mount is the weak link – it works for compact mics but isn’t universal.

Best For

Beginners building a first podcast or streaming setup, students on a tight budget, and anyone who wants everything in one box without buying accessories separately.

Skip If

You already own a shock mount and pop filter – you’ll be paying for duplicates. The InnoGear MU01 above is the better pure-arm choice.

6. SUNMON QuadCast Boom Arm – Best Compact Arm for HyperX QuadCast

The SUNMON QuadCast Boom Arm is purpose-built for HyperX QuadCast owners. The pre-installed silver adapter means your QuadCast drops in without a single tool, no extra adapter hunt, and no compatibility guessing. For streamers who picked the QuadCast as their first serious mic, this is the cleanest setup path under $25.

I tested the SUNMON with a QuadCast S and a Blue Yeti. The QuadCast slid onto the mount and locked in two seconds. Switching to the Yeti required the included 3/8 to 5/8 adapter, which took another ten seconds. The dual suspension springs held both mics steady, and the compact 15.75 inch footprint fits a small desk where the InnoGear MU01 would feel oversized.

The compact form factor has trade-offs. With a 15.75 inch item dimension, the SUNMON doesn’t reach as far as the FIFINE BM88 or InnoGear MU-PSA28. For desks 24 inches deep or less, the SUNMON has plenty of reach. For deeper L-shaped desks, look at the longer-reach options.

Spring Tension and Stability

The dual suspension springs are tighter than the single-spring design on the cheapest arms. After 14 days of daily repositioning, the SUNMON held its angle without drifting. The reinforced knobs let you adjust spring tension if the mic feels too heavy or too light. For the HyperX QuadCast (1.3 lb), the arm sits in the middle of its tension range, which is exactly where you want it.

Desk Clamp Specs

The clamp fits desktops up to 1.89 inches thick with a protective sponge layer. The sponge prevents scratches and adds grip. I tested it on a 1.5 inch thick IKEA desk, and the clamp held firm. For desks thicker than 1.89 inches, you’ll need a different arm or a desk-edge workaround.

Best For

HyperX QuadCast and SoloCast owners, streamers with small desks, and budget buyers who want a QuadCast-specific setup without adapter hunting.

Skip If

You need long reach for a deep desk – the FIFINE BM88 above extends to 29 inches for about twice the price.

7. InnoGear Tripod Boom Arm Floor Stand – Best Floor Stand for Standing Recording

The InnoGear TS186 is the floor stand I tested for our team’s standing-desk recorder. The 89.8 inch max height clears a tall user standing at a 42 inch tall desk, and the detachable boom arm swings 360° horizontally for easy mic placement. For podcasters recording both seated interviews and standing presentations, this stand does both without a second rig.

Floor stands live or die by tripod stability. The TS186 uses thickened steel poles and weighs 4 lbs by itself, which gives it a lower center of gravity than cheaper aluminum tripods. I tested it with a Blue Yeti at full extension on hardwood floor – no wobble. On carpet, the legs need a sandbag or weight to prevent drift during animated recordings.

The detachable boom arm is the smartest feature. You can run the TS186 as a straight mic stand (no boom) for vocalists, then attach the 16 to 30 inch boom arm for instrument recording or podcasting. The included carrying bag fits the whole disassembled kit, which is convenient for mobile podcasters.

Height Range and Use Cases

The 28.1 inch minimum height works for seated floor-level recording (think: drum overheads or guitar amp mics). The 89.8 inch maximum clears standing presenters and tall performers. The detachable boom arm adds another 30 inches of horizontal reach. This is the most versatile stand in the roundup for users who record in different positions.

Weight Capacity and Stability

Rated for 2 kg / 4.4 lb, the TS186 handles most broadcast and condenser mics. The Shure SM7B (1.68 lb) sits comfortably at mid-extension. The 4 lb tripod base stays planted on hard floors with mics up to about 3 lb total. Beyond that, you’ll want a sandbag for safety.

Best For

Vocalists, mobile podcasters, presenters who alternate seated and standing, and anyone recording in multiple positions.

Skip If

You want a permanent desk-mounted setup – the InnoGear MU01 above is the better daily-driver arm for desk work.

8. FIFINE CS1 Scissor Microphone Boom Arm – Best Budget Scissor Arm for Travel

The FIFINE CS1 is the cheapest scissor arm in our roundup that I’d actually recommend. Priced under $20, it pairs naturally with FIFINE microphones like the K669B, K670, K683A, K658, and K688, and the included adapter covers Blue Yeti and Shure mics too. For a home office setup that occasionally travels to a friend’s place for co-recording, this is the right form factor.

I tested the CS1 with a FIFINE K688 and a HyperX QuadCast. The K688 mounted without an adapter thanks to the pre-installed threading. The QuadCast required the included 5/8 to 3/8 adapter. Both mics held their position through a two-hour recording session. The springs did creak slightly during the first week, which is normal break-in behavior for budget scissor arms.

The foldable design is the differentiator. The CS1 collapses to a flat profile that fits in a laptop bag. For remote podcasters who travel to record at different locations, this is the easiest arm to pack. Reviewers on r/podcasting frequently pair the CS1 with FIFINE mics as a starter combo under $100 total.

Build Quality and Limitations

The metal construction is sturdy for the price tier, but the springs are the weak link. After about six months of daily use, expect some tension loss. For occasional or travel use, the CS1 lasts well over a year. For permanent daily studio use, the InnoGear MU01 above is the better long-term investment.

Desk Clamp and Compatibility

The upgraded metal clamp has a 2 inch mouth and an anti-scratch pad. I tested it on a 1.75 inch thick desk edge, and the clamp held without slipping. The pad prevents the clamp from marking finished wood. For very thick desks over 2 inches, the clamp won’t close fully.

Best For

Travelers, remote podcasters, FIFINE mic owners, and budget buyers who need a portable scissor arm.

Skip If

You’re setting up a permanent home studio – invest in the InnoGear MU01 or FIFINE BM88 for long-term spring durability.

9. Aokeo AK-35 Microphone Desk Stand – Best Entry-Level Boom Arm Under $20

The Aokeo AK-35 is the cheapest boom arm I’d stake my audio on. Under $17, this arm handles a Blue Yeti, a Blue Snowball, a HyperX QuadCast, and an Elgato Wave without complaint. For buyers asking “is a mic boom arm worth it at all?”, the AK-35 is the answer at the lowest possible price tier.

I tested the AK-35 with a Blue Snowball iCE and a Fifine AM8. Both mounted without drama. The super spring support held the mic steady through desk bumps and keyboard taps. The clamp fit my 1.5 inch thick test desk and a 2 inch thick partner desk without slipping. For the price, the build quality genuinely surprised me.

What you’re giving up for the low price is reach (16 inches item dimension), brand-name warranty support, and long-term durability data. Aokeo has fewer reviews than InnoGear or FIFINE, so the long-term track record is thinner. For a first arm to learn with, this is fine. For a permanent studio setup, step up to the InnoGear MU01.

Build and Spring Design

The electrostatic powder coating resists rust and fingerprints better than painted finishes. The super spring is single, not dual, which means the tension range is narrower than the SUNMON or InnoGear arms above. For mics between 0.5 lb and 1.5 lb, the spring sits in its comfort zone. For heavier mics approaching 2 lb, the spring runs at its upper limit.

Adapter and Clamp Range

The 1/4, 3/8, and 5/8 adapter coverage is the widest in this price tier. Most budget arms ship with just one adapter, but the AK-35 includes two. This makes it the right choice if you rotate between mics (a Blue Yeti for streaming, a Fifine AM8 for podcasting). The clamp fits desks up to 2.3 inches thick – the widest range in our roundup.

Best For

First-time buyers, students, very tight budgets, and anyone testing whether a boom arm fits their workflow before investing more.

Skip If

You run a heavy broadcast mic or want long-term spring durability – the InnoGear MU01 above is the better daily driver.

10. Amazon Basics Adjustable Microphone Boom Arm – Best Value Kit With Pop Filter Included

The Amazon Basics Adjustable Boom Arm is the cheapest complete kit in our roundup, and for buyers who want everything in one Amazon box without brand-specific shopping, it’s the right pick. Under $16, you get the boom arm, a pop filter, a foam windscreen, a screw adapter, and a mic clip. For first-time podcasters, this is the lowest-friction entry path.

I tested this arm with a Fifine K688 (1.1 lb) and a HyperX SoloCast (0.5 lb). Both mics fit, and the adjustable tension held them at all angles. The dual-layer pop filter did a better job than expected on hard consonants – comparable to the more expensive InnoGear kit above. The foam windscreen is a nice backup for windy outdoor recording.

What you’re trading for the low price is build quality. The plastic quick-release clamp handle is the weak point – reviewers on r/podcasting noted it can snap after about a year of daily adjustments. For occasional use, this is fine. For daily repositioning, the metal-clamped arms above are more durable.

Adjustable Tension and Use Cases

The adjustable tension mechanism is the standout feature at this price. You can dial in the spring force to match your specific mic weight, which is rare on arms under $20. For buyers running a single mic in the 0.5 to 1.5 lb range, the tension sits in the sweet spot. Heavier mics push the spring past its comfort zone.

Included Accessories

The pop filter is dual-layer mesh, which reduces plosives more effectively than single-layer foam. The windscreen is basic foam. The screw adapter covers 3/8 and 5/8 threads. The mic clip is generic – for larger mics like the Blue Yeti, you’ll want to use the mic’s own clip.

Best For

First-time buyers, students, podcasters on the tightest budget, and anyone who wants a complete kit shipped in one box.

Skip If

You already own a pop filter and shock mount – the InnoGear MU01 above is the better pure-arm value without the duplicate accessories.

How to Choose the Right Microphone Boom Arm Under $100

The cheapest mic boom arm under $100 is the Aokeo AK-35 at around $16. The most expensive in our roundup is the FIFINE BM88 at around $57. Everything else falls between. The right pick depends on your mic weight, your desk setup, and how the arm looks on camera. Here are the five buying factors our team ranked above all others during testing.

Weight Capacity and True Total Weight

The single biggest mistake buyers make is matching the arm’s load rating to their mic’s bare weight. A Blue Yeti is 1.2 lb. Add a shock mount (0.4 lb) and a pop filter (0.2 lb), and you’re at 1.8 lb before you count the cable. The arm needs at least 200g of headroom above that total weight, per the deskfinds buying rule our team validated across 30 days of testing.

For a Shure SM7B plus shock mount and XLR cable, the total approaches 2.5 lb. Only the InnoGear MU-PSA28 (3.5 lb) and the FIFINE BM88 handle that comfortably. For Blue Yeti and HyperX QuadCast setups under 1.5 lb total, any arm in our roundup works.

Reach, Low-Profile, and Traditional Form Factor

Traditional scissor arms stick up above the desk and reach outward. Low-profile arms sit flat against the back edge and extend forward. For on-camera streaming, low-profile wins because nothing blocks your webcam. For podcasting off-camera, traditional scissor arms give you more vertical adjustment and easier repositioning.

Reach matters too. Measure your desk depth before buying. A 24 inch deep desk pairs with a 26 to 29 inch reach arm. A 30 inch deep desk needs 32 inches or more. The InnoGear MU-PSA28 with its 32.3 inch reach is the longest in our roundup. The compact SUNMON at 15.75 inches fits small desks but falls short on deeper surfaces.

Desk Clamp Compatibility, Glass Desks, and Thick Desks

Every clamp-mounted arm in our roundup fits desks between 0.8 and 2.4 inches thick. If your desk is outside that range, you have two options. For thick desks over 2.4 inches, look for an arm with a wider clamp mouth like the Aokeo AK-35 (2.3 inches). For glass desks, never use a C-clamp – the pressure can crack the glass. Use a grommet mount through a drilled hole, or place a protective wooden plank on the desk before clamping.

Glass desk buyers should also consider the Elgato Wave Mic Arm LP or a dedicated grommet-mount arm outside our roundup. For renters who can’t drill their desk, a thick wooden cutting board between the clamp and the glass is a workable workaround.

Cable Management: Hidden Channels vs Cable Ties

Cable management separates budget arms from serious recording rigs. Cable ties bundle your XLR cable to the arm but leave it visible. Hidden cable channels inside the arm conceal the cable end to end. For podcasters recording video, hidden channels make a visible difference on camera. For voice-only podcasters, cable ties are fine.

The InnoGear MU-PSA28 has actual cable channels with removable rubber covers – the cleanest in our roundup. The FIFINE BM88 has hidden channels routed inside the arm. Most other arms ship with cable ties only, which work but don’t look as clean.

Spring Tension and Long-Term Durability

Spring sag is the most-cited failure mode on r/podcasting and r/recordingmusic. A cheap arm holds its position for a few months, then the spring loses tension and the mic slowly droops during recording. Reviewers call this “droop” or “sag” and it’s the #1 reason budget arms end up in a closet within a year.

To avoid spring sag, look for arms with dual suspension springs (the SUNMON and InnoGear MU-PSA28 both qualify), all-metal construction rather than plastic, and user reports of 6+ months of daily use without tension loss. After 30 days of testing, the InnoGear MU01, FIFINE BM88, and InnoGear MU-PSA28 all held tension without measurable drift.

Frequently Asked Questions

The Best Microphone Boom Arm Under $100 for Your Setup

If you want the single best microphone boom arm under $100 for most people in 2026, get the InnoGear Boom Arm Mic Stand. It held position through 30 days of daily testing, the springs resisted sag, and the 360° base rotation fits Blue Yeti, HyperX QuadCast, and most entry-level XLR mics out of the box. For a first boom arm under $25, nothing else in our roundup beats it.

If you stream on camera and care about a clean webcam shot, the FIFINE BM88 low-profile boom arm is the right pick. It sits below your monitor, hides the cable in built-in channels, and uses all-metal construction for a pro-looking rig at about half the price of an Elgato Wave Mic Arm LP. For heavy broadcast microphones like the Shure SM7B, the InnoGear MU-PSA28 with cable management is the strongest choice in our roundup, with a 3.5 lb load rating and the longest reach at 32.3 inches.

For other audio gear to pair with your new boom arm, check out our guides to the best wireless microphone systems, the best studio chairs with adjustable arms, and the best wireless lavalier microphone systems for a complete home recording setup. Whichever boom arm you choose from this list, your mic will sit closer to your mouth, your desk will stay cleaner, and your recordings will sound noticeably better than with the mic sitting flat on your desk.