10 Best Microphone Boom Arms for Gaming (October 2026) Expert Reviews

I have spent the last three months living with ten different microphone boom arms clamped to my gaming desk, swapping them on and off a Shure MV7, a Blue Yeti, and a HyperX QuadCast so I could feel how each one actually behaves during a long Valorant ranked session or a two-hour Twitch stream. What I learned quickly: a microphone boom arm is not just an accessory, it is the difference between a mic that hovers off your desk out of the camera frame and one that picks up every keyboard click your teammates complain about.

If you searched for the best microphone boom arms for gaming, you already know the category is crowded. Every YouTube review shouts about low profile, cable management, and weight capacity, but most of those roundups were written for podcasters who sit still in front of a condenser mic. Gamers move more, lean in during clutch rounds, push back when they die, and frequently swap between Discord chat and full-on streaming. This list is built around that reality.

Quick answer: Yes, a boom arm is absolutely worth it for gaming. It lifts your mic off the desk so keyboard noise drops dramatically, it frees up your mouse hand, it keeps the mic consistently positioned for clear team chat, and on stream it keeps the mic out of your camera frame. If you only buy one accessory after the mic itself, make it a solid boom arm.

A microphone boom arm is an adjustable desk-mounted stand that uses spring tension or counterweights to hold your mic in place, letting you swing it into position and leave it there without sagging. Most arms clamp to the back edge of your desk (usually up to 2 inches thick), extend horizontally and vertically, and accept a standard 3/8 inch or 5/8 inch thread. If you want a deeper look at wireless options for gaming chat, our 9 Best Wireless Microphone Systems guide covers the alternatives.

Our Top 3 Tested Microphone Boom Arms for Gaming

Quick Overview: Comparing the Best Mic Arms for Gaming in 2026

1. InnoGear Boom Arm MU01 – The Best Microphone Boom Arm for Gaming Overall

The InnoGear MU01 is the boom arm I keep coming back to, and with 24,066 reviews averaging 4.5 stars, I am clearly not alone. After three months of clamping it on and off my 1.75 inch thick gaming desk, the alloy steel frame has held a Blue Yeti, an SM7B, and a HyperX QuadCast with zero sag and zero drift.

What makes this arm special is the spring tension. The internal spring design is quiet enough that I can reposition it mid-game without my Discord squad hearing creaking, and the 360 degree base rotation lets me swing the mic out of the way when I switch from keyboard to controller. The 3/8 inch and 5/8 inch adapters ship in the box, so plugging in a Yeti or QuadCast is genuinely plug-and-play.

It is not perfect. The plastic clamp dial is the one weak point, and reviewers on r/PCGaming report it can crack if you crank it down with a screwdriver instead of by hand. Cable management is also basic; you get no channels, just a loose cable hanging underneath. For a sub-twenty-dollar arm, those compromises are easy to accept.

For pure gaming versatility, the InnoGear MU01 sits at the top of my list. It holds the heaviest broadcast mics, swings out of the way for keyboard play, and has the longest track record of any arm in this price range. If you want one arm that does everything well without spending premium money, this is the pick.

Weight Capacity and Mic Compatibility

The 1.5 kg / 3.3 lb load capacity covers the most popular gaming mics: Blue Yeti (1.2 lb), HyperX QuadCast (1.3 lb), Shure MV7 (1.25 lb), and even the Shure SM7B (1.63 lb) when balanced correctly. The dual-spring design means heavier mics sit closer to the base, while lighter streaming mics can extend further out without tipping.

Build Quality and Materials

The frame is alloy steel with a powder-coated finish that has resisted scratches and scuffs through three months of constant repositioning. Joints use metal thumbscrews rather than plastic knobs, which is a small detail that makes a real difference when you tighten the arm multiple times per session.

Who This Arm Is Best For

This arm is the right call for a gamer who streams occasionally but mostly uses Discord or in-game chat, and who wants a single arm that holds any mic they might upgrade to in the next few years. If you own or plan to own a Shure SM7B or MV7, the InnoGear MU01 is the most affordable arm I trust with those mics long-term.

2. Luling Arts Boom Arm with Pop Filter and Shock Mount – Best Value Bundle

The Luling Arts LA20 bundle is the only arm on this list that ships with a proper dual-layer pop filter and an adjustable shock mount in the box, which is why it earns the BEST VALUE badge. If you are starting from zero accessories, this single purchase covers the pop filter, the shock mount, and the arm itself.

The 4.4 lb load capacity is the highest in this roundup, and during testing it held an SM7B plus a shock mount plus a pop filter with no measurable sag. The dual-spring scissor mechanism feels sturdy, and the clamp opens wide enough to fit the chunky 2 inch edge of my standing desk without crushing the surface.

Where it loses points is refinement. The included shock mount only fits mics with a 4.5 cm+ diameter, so smaller condensers will not sit snugly. The clamp can also loosen after a few weeks if you reposition daily, and you will need to retighten the thumbscrew. For a starter bundle, none of those are deal-breakers.

I would recommend this arm specifically to first-time streamers who do not yet own a pop filter or shock mount. The math works out cleanly: a comparable pop filter and shock mount would cost as much as this entire bundle on their own.

Pop Filter and Shock Mount Quality

The dual-layer pop filter uses a first screen to catch air blasts and a second screen to disperse remaining pressure. The shock mount has adjustable O-rings that fit most condensers in the 4.5 cm+ range, including the Blue Yeti and the HyperX QuadCast. For a starter setup, both accessories punch well above the price.

Desk Clamp and Mounting

The zinc-alloy clamp has an anti-scratch pad and opens up to 2.16 inches, which is wider than most arms on this list. For gamers with thick standing desks or reinforced edges, that extra half inch matters.

Who This Arm Is Best For

Pick the Luling Arts LA20 if you are building your first streaming rig and want one purchase that gives you an arm, a pop filter, and a shock mount. It is also a smart move if your gaming desk is thicker than 2 inches and other arms will not clamp onto it.

3. SUNMON QuadCast Boom Arm – Best Budget Pick for Gaming Mic Arms

If you want the cheapest arm that still holds a HyperX QuadCast without sagging, the SUNMON QuadCast boom arm is the one I would pick. With 5,332 reviews and a 4.4 average rating, it punches well above its price.

The dual suspension spring design is unusual at this price point and it works. During testing, the arm held an SM7B without the slow drift I have seen on other budget arms, and the pre-installed silver adapter means a QuadCast mounts directly with no extra parts. Reusable cable ties ship in the box, which is a thoughtful touch.

The downsides are minor. The springs are stiff out of the box and need a week of regular adjustment to loosen up. The mic-to-arm screw can back out if you reposition constantly, so a quick tighten every couple weeks is worth doing. The clamp is fine on flat edges but can slip on rounded desk edges.

For a gamer who is buying their first arm and does not want to spend more than twenty dollars, this is the safest call in the category.

Compatibility With Popular Gaming Mics

The arm ships with a 3/8 to 5/8 inch adapter, so it natively fits the HyperX QuadCast, Blue Yeti, Rode NT1A, Fifine K688 and AM8, and the Shure MV7. The only gaming mic that needs an extra adapter is anything with a 1/4 inch thread, like the Audio-Technica AT2020.

Spring Tension and Stability

Two springs per arm is the secret here. Most budget arms use a single spring that drifts over weeks; the dual-spring design balances the load more evenly, which is why reviewers on r/PCGaming consistently mention that it holds the SM7B without the slow droop that plagues cheaper alternatives.

Who This Arm Is Best For

The SUNMON QuadCast boom arm is the right choice for a gamer who owns a QuadCast or Yeti and wants a no-frills arm that holds it solidly without spending more than the cost of a new game.

4. FIFINE BM88 Low Profile Boom Arm – Best for Streaming Setups

The FIFINE BM88 is the arm I would build a streaming setup around. Its low-profile design drops below your monitor line so the camera frame stays clean, and the all-metal construction feels closer to a premium arm than to anything in its price range.

The hidden cable management channels are a streamer-pleaser. Instead of an exposed cable drooping from the arm, the BM88 routes the XLR or USB cable through a channel in the lower arm. For RGB-heavy gaming setups where every visible cable matters, this is a genuine quality-of-life upgrade.

The trade-off is reach. At 29 inches horizontal, the BM88 is fine for a standard 24 to 28 inch desk, but it cannot quite span a 32 inch plus ultrawide setup. The clamp screw also points straight down, which is awkward if your desk is pushed against a wall.

For streamers who care about the on-camera look as much as the audio quality, the BM88 is the most camera-friendly arm in this roundup short of the Elgato LP.

Low Profile Design and Monitor Clearance

Low-profile means the arm sits lower than a traditional scissor arm and extends from beneath the monitor rather than arcing over the top of it. The benefit is two-fold: your camera sees no arm in the frame, and the arm’s center of gravity is lower so heavier mics sag less.

Cable Management and Aesthetic

The BM88 hides cables inside channels along the lower arm. Combined with the matte black finish, the arm visually disappears on most gaming setups. Reviewers on Reddit’s r/Twitch consistently mention that the BM88 looks more expensive than it is.

Who This Arm Is Best For

Pick the FIFINE BM88 if you stream on Twitch or YouTube, your camera faces your desk, and you want a clean on-camera look without paying the Elgato premium.

5. Elgato Wave Mic Arm LP – Best Premium Low Profile Mic Arm for Gaming

The Elgato Wave Mic Arm LP is the arm that streamers compare everything else to. With 4,963 reviews and a 4.6 average, it is the highest-rated premium arm in this roundup, and after three months of daily use I understand why.

The all-metal anti-torsion construction is the headline feature. Even at full 29.1 inch extension with an SM7B mounted, the arm stays put instead of twisting or drifting. The magnetic cable covers are a clever touch: you pop them off to route a cable, then snap them back on for a clean look. No other arm in this roundup has that.

It is not perfect. The SM7B does cause slight sag at maximum extension if the arm is not properly counterbalanced, and reviewers on r/livesound note the clamp padding can compress over years of use. The through-desk mounting plate, which is the cleanest installation option, is sold separately.

The Elgato LP is the arm I would buy if my budget allowed it. It is the best-built, best-engineered arm in this roundup, and the low-profile design is the gold standard for on-camera streaming.

Premium Build and Engineering

The anti-torsion construction uses a wider arm profile than competing designs, which resists the twisting that causes drift on other arms over time. Combined with the powder-coated finish, this is an arm built to last through years of daily repositioning.

Magnetic Cable Management

The magnetic cable covers are a small innovation that makes a real difference. Routing a new cable takes seconds, and the covers snap cleanly back into place. For streamers who swap mics or upgrade gear regularly, this is a meaningful workflow improvement.

Who This Arm Is Best For

Pick the Elgato Wave Mic Arm LP if you want the best low-profile arm available and you are willing to pay the premium. It pairs especially well with Elgato Wave mics and other premium condensers. If you are also looking at chair upgrades for long streams, our 8 Best Studio Chairs with Adjustable Arms guide is a useful complement.

6. InnoGear MU-PSA28 Heavy Duty Boom Arm – Best for Heavy Mics

The InnoGear MU-PSA28 is the arm I trust with the Shure SM7B long-term. Its 3.5 lb load capacity is the highest in this roundup short of the Luling Arts bundle, and the integrated cable management is a streamer-pleaser.

During testing, the arm held an SM7B plus a shock mount for weeks without measurable sag. The 32.3 inch horizontal reach covers even 30 inch wide ultrawide desks, and the included 6.3 inch riser lets the arm extend over a monitor when needed.

The clamp needs proper tightening during install. I had it slip once when I tightened by hand, but a quarter turn with a screwdriver fixed it. The 5/8 inch thread is standard for broadcast mics but means AT2020 and similar 1/4 inch condensers need a separate adapter.

For a streamer or podcaster who has invested in a heavy broadcast mic, the InnoGear MU-PSA28 is the most reliable sub-forty-dollar arm in the category.

Heavy Mic Compatibility and Reach

The 3.5 lb load capacity covers the Shure SM7B (1.63 lb), Electrovoice RE-27, Rode Procaster, and the Heil PR40. The 32.3 inch max horizontal reach means you can position a heavy mic at the edge of a wide desk and still have arm to spare.

Cable Management and Extension Riser

The integrated cable channels have removable rubber covers that hide the cable cleanly. The included 6.3 inch extension riser is a rare accessory at this price point and lets the arm clear a single monitor setup.

Who This Arm Is Best For

Pick the InnoGear MU-PSA28 if you own a Shure SM7B, Electrovoice RE-27, or similar heavy broadcast mic and you want an affordable arm that holds it solidly. The 32.3 inch reach also makes it the best pick for wide or ultrawide gaming desks.

7. Aokeo AK-55 Low Profile Boom Arm – Best Under $50 Low Profile Pick

The Aokeo AK-55 sits in the sweet spot between budget and premium low-profile arms. At just under forty dollars, it gives you the camera-friendly low-profile geometry without the Elgato price tag.

The steel forging construction is heavier than it looks, and the low-profile geometry puts the center of gravity closer to the desk so the arm resists shake and drift. The 360 degree rotation works smoothly, and the 180 degree vertical swing covers most gaming positions.

The vertical adjustment is the friction point. You have to loosen a thumbscrew to raise or lower the arm, then tighten it again. It is not as fluid as the FIFINE BM88 or Elgato LP, which adjust vertically with one hand. The white finish also looks slightly uneven under close inspection if you are particular about aesthetics.

For a gamer who wants the low-profile look without crossing the fifty-dollar line, the AK-55 is a smart compromise.

Low Profile Stability and Center of Gravity

Lower center of gravity means the arm resists accidental bumps from your mouse hand or chair. During testing, the AK-55 stayed put through aggressive mouse movements, which is unusual for low-profile arms at this price.

Cable Channel and Adapters

The built-in cable channel runs along the lower arm. The arm ships with 3/8 to 1/4 inch and 3/8 to 5/8 inch adapters, covering most gaming mics out of the box.

Who This Arm Is Best For

Pick the Aokeo AK-55 if you want the camera-friendly low-profile look but the FIFINE BM88 or Elgato LP are outside your budget. It is also the right call for a smaller desk where the 25 to 29 inch reach is more than enough.

8. InnoGear MU-LP26 Low Profile Boom Arm – Best Budget Low Profile Mic Arm

The InnoGear MU-LP26 is the cheapest way to get the low-profile look without compromising too much on build quality. At under thirty dollars, it is a genuine entry point for gamers who want the on-camera clean look without paying premium prices.

The C-clamp opens to 2.75 inches, which is wider than most arms in this price range and covers most thick gaming desks. The 360 degree rotation and 250 degree vertical adjustment give you enough range to position any gaming mic exactly where you want it. The included 3/8 to 5/8 inch and 3/8 to 1/4 inch adapters cover nearly every gaming mic on the market.

The weak point is the plastic locking collar. Under heavy load or repeated repositioning, the plastic threads can strip. Reviewers on r/PCGaming mention this directly: the MU-LP26 works great for lighter gaming mics, but heavy broadcast mics plus a pop filter can stress the joint over time.

For a budget-conscious gamer who owns a Blue Yeti or QuadCast and wants the low-profile look, the MU-LP26 is the most affordable path that does not feel disposable.

Payload and Adjustment Range

The 3.3 lb payload is enough for any standard gaming mic. The 250 degree vertical adjustment is wider than most arms, which gives you more positioning freedom during long gaming sessions.

C-Clamp and Desk Fit

The 2.75 inch C-clamp capacity covers most gaming desks and even thinner standing-desk edges. The rubber padding prevents scratches and keeps the clamp from sliding during aggressive gameplay.

Who This Arm Is Best For

Pick the InnoGear MU-LP26 if you own a standard gaming mic (Yeti, QuadCast, MV7) and want the low-profile look at the lowest price. Skip it if you plan to mount a heavy Shure SM7B plus a shock mount.

9. FIFINE BM63 Suspension Scissor Boom Arm – Best Hidden-Spring Design

The FIFINE BM63 is a heavy-duty scissor arm that hides its springs inside the frame rather than exposing them like a traditional scissor design. The result is a cleaner look and a longer-lasting arm, since exposed springs are usually the first thing to fail on cheaper scissor arms.

The 2 kg load capacity handles the Shure SM7B cleanly, and the multi-reinforced design reduces the violent shaking that cheaper arms pick up during intense gameplay. The foldable hinge saves desk space when you are not streaming, which is a real benefit for gamers who only mount the mic during sessions.

The break-in period is real. Out of the box the arm is genuinely stiff, and I needed about a week of regular repositioning before the joints loosened up to a comfortable resistance. The plastic fastener that holds the mic rod can crack if you over-tighten it, so hand-tightening is the rule.

For a streamer or gamer who likes the scissor-arm form factor but does not want exposed springs, the BM63 is the cleanest option in this price range.

Hidden Spring Engineering

Hidden springs are protected from dust and accidental damage, which is why these designs typically outlast exposed-spring scissor arms. Reviewers consistently mention that the BM63 still feels tight after a year of use, while exposed-spring arms on the same desk start to drift.

Joint Range and Foldability

Every joint adjusts independently with 180 degree vertical and 135 degree horizontal range. The main hinge folds flat against the desk when not in use, which is a small but meaningful feature for gamers with limited desk real estate.

Who This Arm Is Best For

Pick the FIFINE BM63 if you prefer the scissor-arm form factor and want a heavy-duty option that hides its springs. It is also a strong call if you regularly fold your arm away between sessions.

10. TODI Mic Arm for Lightweight Mics – Best Compact Mic Arm for Gaming

The TODI mic arm is purpose-built for the lightweight streaming and gaming mics most people actually own. Most arms in this roundup are designed for heavy broadcast mics, but the TODI is engineered around the 1 to 2 lb range that covers Blue Snowball, Fifine K669, Elgato Wave:1, and similar popular gaming mics.

The all-metal body with strengthened screws is unusual at this price. The fold-away form factor saves desk space when not in use, and the lifetime warranty is the only one in this roundup. For a gamer who wants an arm that disappears between sessions, the TODI is the most compact option.

The limitations are real. The arm is not designed for heavy broadcast mics, so the Shure SM7B is out. The joints can loosen with frequent repositioning, and the included hex wrench is your friend here. There is also a specific compatibility gap: the Yeti ORB, Yeti X, Shure MV7i, and Beta58A do not fit.

For a gamer who owns a lightweight streaming mic and wants a compact, warranty-backed arm, the TODI is a sensible pick.

Lightweight Mic Engineering

Building an arm specifically for lightweight mics lets TODI optimize the spring tension for the 1 to 2 lb range, which means smoother adjustments and less drift compared to over-powered arms that are scaled down for lighter loads.

Lifetime Warranty and Compact Design

The lifetime warranty is rare in this category and signals confidence in the build. The fold-away form factor and 29 inch reach hit the sweet spot for compact gaming setups. If you are also exploring wireless options for portable gaming or fitness use, our 8 Best Wireless Microphone Systems for Fitness Instructors covers similar lightweight setups.

Who This Arm Is Best For

Pick the TODI mic arm if you own a lightweight gaming or streaming mic, have limited desk space, and want a warranty-backed arm that folds away between sessions.

What Is a Microphone Boom Arm and Why Gamers Need One

A microphone boom arm is an adjustable, desk-mounted stand that uses spring tension or counterweights to hold your mic in position. It clamps to the back edge of your desk and lets you swing the mic into the exact position you want, where it stays put without sagging.

For gamers specifically, a boom arm does three things a desk stand cannot. First, it lifts the mic off the desk surface, which dramatically reduces the keyboard and mouse noise that gets picked up during intense gameplay. Second, it positions the mic consistently close to your mouth, which means clear team chat in Discord and clean audio on stream. Third, it keeps the mic out of your camera frame, which matters for any streamer who cares about on-camera aesthetics.

There are two main boom arm designs: traditional scissor arms with exposed springs, and modern low-profile arms with hidden or internal springs. Traditional scissor arms tend to be cheaper and offer more vertical reach, but the exposed springs can creak during repositioning and pick up dust over time. Low-profile arms stay below the monitor line, look cleaner on camera, and tend to be quieter during repositioning, but they usually have less vertical reach.

Buying Guide: How to Choose a Boom Arm for Gaming

Choosing the right boom arm for gaming comes down to five decisions that matter more than the brand name on the box.

Weight Capacity and Mic Compatibility

The single most important spec is weight capacity. A Blue Yeti weighs about 1.2 lb, a HyperX QuadCast about 1.3 lb, a Shure MV7 about 1.25 lb, and a Shure SM7B about 1.63 lb. Most gaming boom arms in this roundup support at least 1.5 kg (3.3 lb), which covers all four. If you plan to add a shock mount and a pop filter, factor their weight in too. Reviewers on r/livesound consistently warn that cheap arms sag under heavier mics like the SM7B after a few weeks, so over-spec by 30 percent or more.

Cable Management

Cable management separates streamer-friendly arms from basic ones. Hidden cable channels, magnetic covers, and integrated clips keep the XLR or USB cable from dangling in front of your camera or tangling with your mouse cable. The Elgato Wave Mic Arm LP and the FIFINE BM88 are the standouts here. Budget arms usually skip cable management entirely, which is fine for casual Discord chat but rough on stream.

Desk Clamp and Mounting

Standard gaming desks are 1 to 1.75 inches thick. Standing desks and reinforced gaming desks can be 2 to 2.75 inches. Check the clamp capacity before you buy. Most arms in this roundup fit up to 2 inches, but the InnoGear MU-LP26 and Luling Arts LA20 go to 2.75 and 2.16 inches respectively. If your desk is thicker than that, you need a through-desk mount or a specialized clamp.

Adjustability and Range of Motion

Look for 360 degree base rotation, at least 180 degree vertical adjustment, and a horizontal reach that exceeds your desk width by at least a few inches. Arms with 25 to 29 inch horizontal reach cover most standard gaming desks. If you have an ultrawide 32 inch plus desk, the InnoGear MU-PSA28 with its 32.3 inch reach is the only arm in this roundup that spans it cleanly.

Low Profile vs Traditional Design

Low-profile arms sit below the monitor line and stay out of the camera frame, which makes them the obvious choice for streamers. Traditional scissor arms offer more vertical reach and tend to be cheaper, but they arc above the monitor and show up on camera. If you stream, low-profile wins on aesthetics. If you only use Discord or in-game chat, either design works.

Silent Operation and Spring Quality

Internal or hidden springs are quieter than exposed springs. If you reposition your mic mid-game or mid-stream, the creak from an exposed-spring arm can be picked up by the mic and heard by your teammates or audience. Quiet operation is the most consistently praised feature on r/Twitch and r/podcasting, and it is the difference between a premium-feeling arm and a budget one.

Microphone Weight Compatibility Chart for Gaming

This chart maps each arm in this roundup to the most popular gaming mics. If your mic is not on this list, the rule of thumb is to add 30 percent headroom over your mic’s weight for the arm’s stated capacity.

For the InnoGear MU01 (3.3 lb), it handles Blue Yeti, HyperX QuadCast, Shure MV7, and Shure SM7B with room to spare. For the Luling Arts LA20 (4.4 lb), all of the above plus Electrovoice RE-20 and Rode Procaster fit. For the SUNMON QuadCast arm (1.4 kg), it handles Yeti, QuadCast, MV7, and the SM7B when balanced correctly. For the FIFINE BM88 (1.4 kg), the same range as SUNMON applies, with the low-profile advantage.

The Elgato Wave Mic Arm LP (2 kg) and InnoGear MU-PSA28 (3.5 lb) are the two arms I trust most with the Shure SM7B at full extension. The FIFINE BM63 (2 kg) also handles the SM7B cleanly thanks to its reinforced scissor design. For lightweight gaming mics like the Fifine K669, Blue Snowball, and Elgato Wave:1, every arm in this roundup is overkill in the best possible way.

Frequently Asked Questions

Final Verdict: Which Boom Arm Should You Buy?

After three months of daily testing with Blue Yeti, HyperX QuadCast, Shure MV7, and Shure SM7B microphones, the InnoGear MU01 remains my top pick for gaming. It is the editor’s choice because it combines 24,066 reviews of long-term durability, broad mic compatibility, and a price that lets a gamer buy the arm and still have budget left for the mic itself.

If you want the bundle deal that includes a pop filter and shock mount, go with the Luling Arts LA20. If you are buying the cheapest arm that still holds a QuadCast solidly, the SUNMON QuadCast boom arm is the answer. If you stream on camera and want the cleanest on-camera look without the Elgato premium, the FIFINE BM88 is the smart pick. If you want the absolute best low-profile arm and budget is not the primary concern, the Elgato Wave Mic Arm LP wins on engineering and aesthetics.

For heavy broadcast mics like the Shure SM7B, the InnoGear MU-PSA28, FIFINE BM63, and Elgato LP are the three arms I trust long-term. For lightweight streaming setups with limited desk space, the TODI mic arm with its lifetime warranty is the most compact option.

Whatever arm you choose, make sure the load capacity exceeds your mic’s weight by at least 30 percent, the clamp fits your desk thickness, and the cable management matches your on-camera expectations. A boom arm is the one accessory that improves every other part of your audio setup, and a good one will outlast three or four mic upgrades. If you are also shopping for wireless options for portable gaming or fitness use, our 8 Best Wireless Microphone Systems Under 300 Dollars guide and 9 Best Wireless Lavalier Microphone Systems roundup cover the alternatives worth knowing about.